emergency call - 24/7

Products Center

Get a quote

black non-clogging sewage pump

black non-clogging sewage pump Service conditions

The the medium being pumped shall be slurry at normal temperature (below 40℃), PH value between 4 and 10. The volume ratio of solid phase in the medium being pumped shall be lower than 2%.
The lift of submersible pump shall not be too low. If the actual lift is below 80% of the stipulated lift, the thermal protector may start to work. And the pump will stop working. Even the motor may be damaged.

black non-clogging sewage pump Product overview

non-clogging submersible sewage pump is developed by our engineers on the basis of the introduction of foreign advanced technology and the suggestions from pump specialists in China.

ModelFlow (m³/h)Lift (m)Power (kw)Power (hp)
WQB10-22-2.210222.23
WQB25-10-2.225102.23
WQB35-7-2.23572.23
WQB50-6-2.25062.23
WQB15-25-3152534
WQB25-20-3252034
WQB50-10-3501034
WQB60-9-360934
WQB15-32-4153245
WQB25-25-4252545
WQB50-13-4501345
WQB60-10-4601045
WQB18-40-5.518405.57
WQB30-30-5.530305.57
WQB65-15-5.565155.57
WQB40-22-5.540225.57
WQB45-22-7.545227.510
WQB100-10-7.5100107.510
WQB140-7-7.514077.510

Technological Process: